Nest 06C Security Sensors Operation Manual

The Nest 06C (Google Nest Protect, Wired Smoke & CO Alarm) is a smart security sensor for smoke and carbon monoxide detection, featuring multi-sensor technology for accurate alerts, voice notifications, and app integration. It serves as a key component in home security by monitoring air quality and hazards. Supports 120V wired installation with battery backup. Below are the key specifications and operation instructions.

Key Specifications

• Type: Wired smart smoke and CO security sensor with multi-sensor detection
• Compatibility:
  • 120V AC hardwired with battery backup
  • Wireless interconnect with other Nest Protects
  • Wi-Fi for app alerts and remote monitoring
  • Integrates with Nest ecosystem
• Power Source:
  • 120V AC, 60 Hz; Backup: 3 AA lithium batteries
  • Low power draw for continuous operation
• Electrical Rating:
  • UL 217/2034 certified
  • Split-spectrum smoke sensor; electrochemical CO sensor
• Temperature Range: Operating: 40°F to 100°F (4°C to 38°C)
• Operating Conditions:
  • Humidity: Up to 85% RH
  • Indoor use; 7-year lifespan
• Dimensions: 5.3" diameter x 1.3" height; Weight: 12 oz
• Features:
  • Voice and app alerts
  • Pathlight illumination
  • Heads-Up early warnings
  • Self-testing
  • False alarm reduction
• Sensor Configuration Options:
  • Multi-unit networks
  • Customizable notifications

Operation Instructions

Initial Setup

1. Install: Wire and mount per Section 3.
2. App Setup: Open Nest app, add device.
3. Configure:

• Connect to Wi-Fi, name sensor location.
• Enable interconnect if multiple units.
• Test detection with smoke/CO simulation.

Setting the Clock and Day

1. Auto-sync via Wi-Fi.
2. App: Settings > Time Zone.
3. Set format and DST.
4. For timed alerts and logs.

Operating in Non-Programmable Mode

1. Mode: Always-on monitoring.
2. Alerts: Voice: "Smoke detected in hall."
3. Hush: Press button.
4. Test: Press twice; app verifies.

Operating in Programmable Mode

1. Default: Continuous with auto-tests.
2. Custom:

• App: Set alert preferences.
• Schedule tests and Pathlight.
• Link to security system.

3. Override: Remote hush.
4. Hold: Silence for cooking.
5. Disable: Offline via app.

Advanced Features

1. Heads-Up: Early app notifications.
2. Pathlight: Night guidance.
3. Interconnect: Whole-home alerts.
4. False Alarm Guard: Humidity-based.
5. App History: Event logs.

Troubleshooting

• No Power: Check breaker, batteries.
  
• Chirp: Replace batteries.
  
• False Alerts: Clean, relocate.
  
• Wi-Fi Loss: Reconnect.

Installation Instructions

Warning: Power off. Ceiling mount; one per room.

Remove Old Sensor

• Power off.
• Twist off, disconnect wires.

Installing New Sensor

1. Wire: Black/hot, white/neutral.
2. Mount backplate.
3. Insert batteries, connect.
4. Twist on.
5. Test in app.

Battery Location

• 3 AA in back tray.
• Replace on alert.

Wiring and Configuration

120V AC; optional interconnect.

Wire	Description
Black	Hot
White	Neutral
Red	Interconnect

Caution: App for setup.